The wood frames have always had great appeal because of their beauty and the sense of warmth that convey so much so that, after a period of relative neglect for the benefit of the aluminum ones (favorites for the advantage of requiring no maintenance) have come back into fashion, regaining lost record, mainly due to entry of a range of specific products for the maintenance of wood, characterized by ease of use and excellent results. Let's see how to best maintain the fixtures in wood, then enjoying their undeniable aesthetic superiority .
Arrange a space to perform necessary operations, choosing him away from other objects that could be damaged and equipping at least one surface (for example, an old table), which have all the necessary tools (in order to have them on hand) and trestles, on which to rest the frame being processed. Underneath the stands, you have sheets of paper and / or cardboard and / or sheets laminated to protect the floor from the products you are going to use.
Unmounted the fixtures you intend to renovate, place them near your work space and, for each of them, perform the following steps. Put the frame on stands and removes all the old paint, to bring the wood in the rough. You achieve this result in various ways, starting from the traditional stripping by hand with sandpaper grain average (better if fixed on a wooden base, which makes it easier to use), passing through the one with the sanding machine (or with a basic electric drill properly equipped) or for the hot (now made much easier and effective by new hot air guns), and ending with the chemical (the least desirable for the toxicity of the products needed, which require caution and protection particularly severe) . In any case, once you got the raw wood, it is good wipe with sandpaper thinner and finally dusting with a dry cloth to remove any residue.
Arrange a space to perform necessary operations, choosing him away from other objects that could be damaged and equipping at least one surface (for example, an old table), which have all the necessary tools (in order to have them on hand) and trestles, on which to rest the frame being processed. Underneath the stands, you have sheets of paper and / or cardboard and / or sheets laminated to protect the floor from the products you are going to use.
Unmounted the fixtures you intend to renovate, place them near your work space and, for each of them, perform the following steps. Put the frame on stands and removes all the old paint, to bring the wood in the rough. You achieve this result in various ways, starting from the traditional stripping by hand with sandpaper grain average (better if fixed on a wooden base, which makes it easier to use), passing through the one with the sanding machine (or with a basic electric drill properly equipped) or for the hot (now made much easier and effective by new hot air guns), and ending with the chemical (the least desirable for the toxicity of the products needed, which require caution and protection particularly severe) . In any case, once you got the raw wood, it is good wipe with sandpaper thinner and finally dusting with a dry cloth to remove any residue.